Husqvarna FC 450 2014 Repair Manual page 127

17 ENGINE
Position the engine braces.
8 .
Mount and tighten screws
Guideline
I
Screw, engine brace
Mount vent hose.
Position the throttle valve body.
0.
Tighten hose clip
Plug in connector (3 .
Position the protection cap.
Mount the spark plug connector @ .
Position the shift lever.
Mount and tighten screw @ .
Guideline
Screw , shift lever
Mount the chain.
Connect the chain with connecting link
Position the clutch slave cylinder with the gasket.
Mount and tighten screws ., _
Guideline
I
Screw, clutch slave cylinder
Position the wiring harness. Mount cable binder
M8
M6 14 Nm
(10.3 lbf ft)
@).
M6
G,
and cable holder �.
125
I I
33 Nm (24.3 lbf ft)
Loctite 243
® ™
10 Nm (7.4 lbf ft)