Installing The Main Silencer; Changing The Glass Fiber Yarn Filling In The Main Silencer - Husqvarna FE 450 2014 Repair Manual

Installing the main silencer

Changing the glass fiber yarn filling in the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
-
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
M00435-10
Main work
-
Mount the main silencer. Mount screws
tighten yet.
8.
-
Attach spring
I
Spring hook (50305017000)
O.
-
Tighten screws
Guideline
Remaining screws,
chassis
Finishing work
-
Install the right side cover.
Preparatory work
-
Remove the right side cover.
-
Remove the main silencer.
Main work
(FE EU/AU)
-
Remove all screws on the main silencer.
-
Take off silencer cap
6)
-
Take off outer tube
-
Remove glass fiber yarn filling
-
Clean the parts that need to be reinstalled and check for
damage.
-
Fit the new glass fiber yarn filling onto the inner tube.
C,
-
Mount 0-ring onto connecting cap
-
Position the inner tube with the connecting cap and glass
fiber yarn filling in the outer tube.
8
-
Mount 0-ring on the silencer cap.
-
Position the silencer cap with 0-ring
-
Mount and tighten all of the screws.
Guideline
Screws on the
main silencer
O
but do not
(!i.,!I p. 312)
M6
10 Nm (7.4 lbf ft)
(!i.,!I p. 91)
(� p. 91)
(� p. 84)
O 8.
and 0-ring
e.
and 0-ring
0
from inner tube (D.
@.
8
in the outer tube.
M5 7 Nm (5.2 lbf ft)
10 EXHAUST
85