Table of Contents
Advertisement
7 HANDLEBAR,CONTROLS
7 .3
7.4
44
Adjustin the basic position of the clutch lever
Checking the routing of the throttle cable
Info
Make sure the gap width is even.
-
Adjust the basic setting of the clutch lever to your hand size
by turning adjusting screw
Info
Turn the adjusting screw clockwise to increase the
distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to
decrease the distance between the clutch lever and
the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not
apply any force.
Do not make any adjustments while riding!
Preparatory work
-
Remove the seat.
(il\:!l
p. 91)
-
Remove the fuel tank.
(il\:!l
Main work
-
Check the routing of the throttle cable.
Both throttle cables must be routed to the throttle valve
body side by side behind the handlebars and above the
fuel tank bearing.
If the throttle cable is not routed as specified:
-
Correct the routing of the throttle cable.
Finishing work
-
Install the fuel tank.
(l!!l
p. 93)
-
Mount the seat.
(!ill
p. 91)
O.
p. 92)
..
..
Advertisement
Table of Contents
