15 WIRING HARNESS, BATTERY
Warning
-
-
-
-
-
-
-
Warning
-
-
126
Installing the batte�
_
0
I
A
____,
0
fJ
H00387-10
Recharging the batte
Battery acid and battery gases cause serious chemical burns.
Risk of injury
Keep batteries out of the reach of children.
Wear suitable protective clothing and safety glasses.
Avoid contact with battery acid and battery gases.
Keep sparks or open flames away from the battery.
Only charge batteries in well-ventilated rooms.
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
Rinse eyes with water for at least 15 minutes and consult a doctor immediately if battery acid and
battery gases get into the eyes.
Batteries contain environmentally-hazardous materials.
Environmental hazard
Do not dispose of batteries as household waste.
Return batteries to your authorized Husqvarna Motorcycles dealer or dispose of them at a collection
point for used batteries.
Main work
-
Insert the battery into the battery compartment with the ter
minals facing forward.
I Battery (YTX5L-BS)
(I!!:!
-
Reconnect rubber band
Info
f)
Contact disks
and cable sockets
tery terminal.
-
Position the positive cable and mount and tighten the screw.
Guideline
Screw, battery termi-
nal
-
Slide positive terminal cover
-
Position the negative cable and mount and tighten the screw.
Guideline
Screw, battery termi-
nal
-
Slide negative terminal cover
Finishing work
-
Mount the seat.
(0
p. 91)
p. 251)
0-
must be mounted under screws
0
with the claws toward the bat
M5
2.5 Nm (1.84 lbf ft)
8
over the positive terminal.
M5
2.5 Nm (1.84 lbf ft)
(D
over the negative terminal.
8