Removing The Spring - Husqvarna FE 450 2014 Repair Manual

Removing the s�ring
Info
The operations are the same on both fork legs.
-
Remove lock ring @.
Info
The lock ring has a beveled end where a screwdriver
can be applied.
-
Warm up the outer tube in area
ing.
Guideline
1
so c
(122 °F)
0
-
Pull the outer tube from the inner tube with a jerk.
Info
Lower sliding bushing @) must be pulled from its
bearing seat.
-
Remove upper sliding bushing
Info
Without using a tool, pull the stack slightly apart by
hand.
-
Take off lower sliding bushing@).
4l&.
-
Take off support ring
G,.
-
Take off seal ring
-
Take off lock ring @.
-
C).
Take off dust boot
-
Unclamp the fork leg.
Preparatory work
-
Disassemble the fork legs.
6 FORK, TRIPLE CLAMP
0
of the lower sliding bush­
(D.
(� p. 19)
21