Removing The Alternator Cover; Positioning The Engine At Ignition Top Dead Center - Husqvarna FE 450 2014 Repair Manual

18 ENGINE
18.3.8
18.3.9
162

Removing the alternator cover

Positioning the engine at ignition top dead center

O.
Remove screws Remove the alternator cover.
8.
Remove centering pins
ket@).
-
Turn the crankshaft counterclockwise until the markings
are flush with the marking
O.
Remove screw
8.
-
Screw in special tool
Locking screw (113080802)
Take off the alternator cover gas­
0
on the cylinder head.
(!ill p. 311)
..
G
..