18 Engine; Removing The Engine - Husqvarna FE 450 2014 Repair Manual

18.1

Removing the engine

Preparatory work
Remove the engine guard.
Drain the coolant. (a p. 232)
Raise the motorcycle with a lift stand.
Remove the right side cover.
Remove the main silencer.
Remove the seat. (Ii.,! p. 91)
Remove the fuel tank. (Ii.,!
Main work
O.
Remove screw
Disconnect the negative cable of the battery.
8.
Loosen hose clip
Pull back the protection cap.
Unplug connector (5).
C,.
Remove screws
Take off the intake air temperature sensor.
0.
Push back hose clamp
Pull off the air release hose.
(a p. 47)
(a p. 12)
(Ii.,! p. 91)
(Ii.,! p. 84)
p. 92)

18 ENGINE

149