Table of Contents
Advertisement
14 WHEELS
122
-
Clean, grease, and mount spacing tube @t.
I Long-life grease
(!!:!I
p. 308)
C,
-
Press new bearing
all the way in from the outside to the
inside.
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
-
Grease new shaft seal ring
8.
-
Mount lock ring
✓ The lock ring engages audibly.
-
Grease new shaft seal ring
Finishing work
-
Install the rear wheel.
(0
-
Remove the motorcycle from the lift stand.
8
and press it in until it is flush.
O
and press it in until it is flush.
p. 112)
(�
p. 12)
Advertisement
Table of Contents
