Table of Contents
Advertisement
6 FORK, TRIPLE CLAMP
6.7
16
Loosening the fork �rotector
Position in
rotector
Removing the fork legs
Finishing work
-
Position the fork protector.
-
Remove the motorcycle from the lift stand.
O
-
Remove screws
and remove the clamp.
8
-
Remove screws
on the left fork leg. Push the fork protec-
tor downwards.
-
Remove the screws on the right fork leg. Push the fork pro
tector downwards.
-
Position the fork protector on the left fork leg. Mount and
O.
tighten screws
Guideline
Remaining screws,
chassis
-
Position the brake line, wiring harness, and clamp. Mount and
8.
tighten screws
-
Position the fork protector on the right fork leg. Mount and
tighten the screws.
Guideline
Remaining screws,
chassis
Preparatory work
-
Switch off all the power consumers and the engine.
-
Remove the headlight mask with the headlight.
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
O
-
Remove screws
and take off the clamp.
-
Remove the cable tie(s).
8
-
Remove screws
and take off the brake caliper.
-
Allow the brake caliper and brake line to hang loosely to the
side.
(�
p. 16)
(l!!ll
p. 12)
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
(�
p. 103)
(�
p. 12)
(�
p. 108)
•
Advertisement
Table of Contents
