Adding Engine Oil - Husqvarna FE 450 2014 Repair Manual

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
21
-
Lay the motorcycle on its side and fill the oil filter housing to
about½ full with engine oil.
-
Insert the oil filter into the oil filter housing.
-
Oil the O-ring of the oil filter cover and mount it with the oil
filter cover @.
-
Mount and tighten the screws.
Guideline
I I
Screw, oil filter cover
Stand the motorcycle upright.
-
Remove the oil filler plug (3 with the O-ring from the clutch
cover and fill up with engine oil.
Engine oil
• Info
I
Too little engine oil or poor-quality engine oil results in
premature wear to the engine.
-
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and check that it is oil-tight.
Finishing work
-
Install the engine guard.
-
Check the engine oil level.
LUBRICATION SYSTEM
M5 I 6 Nm (4.4 lbf ft)
1.50 I Engine oil
(1.59 qt.) (SAE 1 OW /50)
(!!l p. 306)
Exhaust gases are toxic and
(!!l p. 47)
(!!l p. 234)
237