Table of Contents
Advertisement
14 WHEELS
14.8.5
Warning
wheel bearings wear more quickly. Some components may break if overloaded.
rear wheel locks or the engine will be damaged.
-
-
14.8.6
Warning
wheel bearings wear more quickly. Some components may break if overloaded.
rear wheel locks or the engine will be damaged.
-
-
114
Checking the chain tension
Incorrect chain tension damages components and results in accidents.
Danger of accidents
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
Check the chain tension regularly.
Set the chain tension in accordance with the specification.
Adjusting the chain tension
Incorrect chain tension damages components and results in accidents.
Danger of accidents
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
Check the chain tension regularly.
Set the chain tension in accordance with the specification.
Preparatory work
Raise the motorcycle with a lift stand.
Main work
Pull the chain at the end of the chain sliding component
upwards to measure chain tension f).
•
Info
I
The lower chain section
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
Chain tension
I
If the chain tension does not meet specifications:
Adjust the chain tension.
Finishing work
Remove the motorcycle from the lift stand.
Preparatory work
Raise the motorcycle with a lift stand.
-
Check the chain tension.
(0
p. 12)
O
must be taut.
55 ... 58 mm (2.17 ...
1
2.28 in)
(0
p. 114)
(0
p. 12)
(0
p. 12)
(0
p. 114)
..
Advertisement
Table of Contents
