SHOCK ABSORBER, SWINGARM
9
9.16
Disassembling the seal ring retainer
Main work
-
Clamp the piston rod with the fork in a vise.
I
Guideline
Use soft jaws.
-
Remove nut
-
Remove washer
-
Remove rebound shim stack
•
Info
I
Place the rebound shim stack onto a screwdriver and set it down as a unit.
-
Remove piston
-
Remove compression shim stack
•
Info
I
Place the compression shim stack onto a screwdriver and set it down as a
unit.
-
Remove rebound washer
-
Remove seal ring retainer@.
-
Remove locking cap@) and rubber buffer@).
Preparatory work
-
Remove the spring.
-
Disassemble the damper.
-
Disassemble the piston rod.
Main work
-
Remove spring
-
Remove O-ring @.
-
Remove rebound rubber
201405-10
O.
8.
8.
8.
0.
(D.
(�
p. 48)
(�
p. 48)
(�
p. 49)
O.
8.
50