6
FORK, TRIPLE CLAMP
Disassemblin the seal rin retainer
Info
The steps are identical for both fork legs.
6.17
Checking the fork legs
-
Remove adapter
-
Remove hub
•
Info
I
It is possible that only one washer or no washer is present.
-
Remove the O-ring from the hub.
-
Remove shim stack
-
Remove washer @.
-
Remove O-ring
Preparatory work
-
Disassemble the fork legs.
-
Remove the spring.
-
Disassemble the cartridge.
Main work
-
Remove pilot bushing support
-
Remove O-ring
Condition
The fork legs have been disassembled.
-
Check the inner tube and axle clamp for damage.
If there is damage:
-
Change the inner tube.
200728-10
CD.
C,
with washers@).
(D.
@).
(1!<,!1
p. 15)
(1!<,!1
p. 17)
(1!<,!1
p. 19)
O.
8
CD.
and seal ring
22