Removing The Locking Lever; Removing The Force Pump - Husqvarna FC 250 2015 Repair Manual

17 ENGINE
17.3.23

Removing the locking lever

17.3.24

Removing the force pump

O
-
Unscrew and remove together with locking lever
spring.
O.
-
Remove lock ring
8.
-
Take off washer
-
Take off oil pump idler gear
C,.
-
Remove lock ring
0.
Take off washer
-
Remove oil pump gear (D.
-
Remove pin@.
fD.
Remove screws
-
Take off the oil pump cover.
-
Remove pin@).
Push oil pump shaft Qi) inward and take it out of the engine from the ignition
a..
side.
-
Remove force pump
8,
8
with the washer.
136
washer, sleeve and