Disassembling The Seal Ring Retainer - Husqvarna FC 450 2018 Repair Manual

9.16 Disassembling the seal rin retainer
SHOCK ABSORBER, LINK FORK 9
Main work
-
Clamp the piston rod with the fork in a bench vise.
I Guideline
Use soft jaws.
O.
-
Remove nut
@}.
-
Remove washer
-
Remove rebound shim stack@).
• Info
I
Guide the rebound shim stack onto a screwdriver and
put them aside together.
8.
-
Remove piston
-
Remove compression shim stack
Info
Guide the compression shim stack onto a screwdriver
and put them aside together.
-
Remove rebound washer
-
Remove seal ring retainer@.
-
Remove protection cap@) and rubber buffer@).
Preparatory work
-
Remove the spring. (0 p. 66)
-
Disassemble the damper.
-
Disassemble the piston rod.
0.
(D.
(0 p. 67)
(0 p. 68)
..
69