17
ENGINE
17 .3.29
Removing the shift rails
17 .3.30
Removing the shift drum
-
Insert the special tool into the crankshaft.
I
Protection cap (75029090000)
-
Mount special tool @ with the appropriate screws.
I
Puller (77229048000)
(a
•
Info
I
Use the drill hole marked with 772.
-
Take off the section of the engine case.
•
Info
I
Do not subject the section of the engine case to any stress.
The washer of the main shaft usually adheres to the bearing.
-
Take off the left section of the engine case.
-
Remove the special tool.
O
-
Remove shift rail
together with upper spring
CD
-
Remove shift rail
together with upper spring
O
-
Tilt shift forks
to the side.
•
Info
I
Do not misplace the shift rollers.
8.
-
Remove shift drum
(a
p. 228)
p. 229)
8.
e
and the lower spring.
138