Table of Contents
Advertisement
16
BRAKE SYSTEM
Checking the rear brake fluid level
Warning
Danger of accidents
If the brake fluid level drops below the specified marking or the specified value, the brake system is leaking or the brake
linings are worn down.
-
Check the brake system and do not continue riding until the problem is eliminated.
A
Warning
Danger of accidents
-
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule.
Adding rear brake fluid
Warning
Danger of accidents
If the brake fluid level drops below the specified marking or the specified value, the brake system is leaking or the brake
linings are worn down.
-
Check the brake system and do not continue riding until the problem is eliminated.
-
Detach spring
Loosen nut
travel.
-
To adjust the basic position of the foot brake lever to individual requirements,
loosen nut
•
Info
I
The range of adjustment is limited.
Turn push rod Ci) accordingly until you have free travel f). If necessary, adjust
the basic position of the foot brake lever.
I
Guideline
Free travel at foot brake lever
-
Hold push rod Ci) and tighten nut
I
Guideline
Remaining nuts, chassis
-
Hold screw
I
Guideline
Nut, foot brake lever stop
-
Attach spring
An insufficient brake fluid level will cause the brake system to fail.
Old brake fluid reduces the braking effect.
Preparatory work
-
Check the rear brake linings.
Main work
-
Stand the vehicle upright.
-
Check the brake fluid level in level viewer
If the brake fluid has dropped below marking f):
-
Add rear brake fluid.
An insufficient brake fluid level will cause the brake system to fail.
O.
8
and, with push rod Ci), turn it back until you have maximum free
8
(D
and turn screw
accordingly.
8.
(D
and tighten nut@.
O.
(�
p. 109)
(�
p. 112)
13 . . .
5 mm (0.12 ... 0.2 in)
10 Nm (7.4 lbf ft)
I
20 Nm (14.8 lbf ft)
O.
112
I
Advertisement
Table of Contents
