Table of Contents
Advertisement
18
CLUTCH
8
-
Fill bleeding syringe
Bleed syringe (50329050000)
Brake fluid DOT 4
(ll!;!l
p. 220)
-
Mount bleeding syringe
-
Only loosen bleeder screw
ing is possible.
•
Info
I
Immediately wash off any overflowed or spilled brake fluid with water!
Avoid contact between brake fluid and painted parts. Brake fluid attacks
paint!
Use only clean brake fluid from a sealed container!
-
Inject the liquid into the system until it escapes from drill hole
cylinder without bubbles.
-
Drain fluid occasionally from the master cylinder reservoir, to prevent overflow.
-
Tighten the bleeder screw and remove the bleeding syringe with the hose.
-
Correct the fluid level of the hydraulic clutch.
I
Guideline
Fluid level below container rim
-
Position the cover with the membrane. Mount and tighten the screws.
with the appropriate hydraulic fluid.
(ll!;!l
p. 225)
8
0
on bleeder screw
using a fitting section of hose.
0
on the clutch slave cylinder to the point where fill-
I
4 mm (0.16 in)
184
(D
of the master
Advertisement
Table of Contents
