Opensolaris Post-Installation Tasks; Installing System Device Drivers To Support Additional Hardware; To Start The Device Driver Utility; Installing Support Repository Updates - Sun Microsystems Fire X4150 Installation Manual

OpenSolaris Post-Installation Tasks

After completing the OpenSolaris installation and rebooting the operating system,
review the following post-installation tasks and, if necessary, perform the tasks that
are applicable to your system.
"Installing System Device Drivers to Support Additional Hardware" on page 41
■
"Installing Support Repository Updates" on page 41
■
"Enabling the Option for Wake On LAN" on page 41
■
Installing System Device Drivers to Support
Additional Hardware
The Device Driver Utility enables you to connect to the Image Packaging System
(IPS) and use it to search for device drivers for the devices on your system that do
not have a driver attached with them.

▼ To Start the Device Driver Utility

●
Click the Device Driver Utility icon on the OpenSolaris desktop.

Installing Support Repository Updates

A Support Repository Update (SRU) contains the latest released bug fixes for your
OpenSolaris release.
Directions for accessing and installing SRUs can be found at:
http://sunsolve.sun.com/show.do?target=opensolaris

Enabling the Option for Wake On LAN

After installing the operating system, you might want to consider enabling the Wake
On LAN (WOL) option in the BIOS Setup utility. This features enables you to power
on the server from another location over the network.
(optional)
Chapter 4 OpenSolaris Installation 41