6 CONTROLS
6.5
6.6
6.7
18
S03586-10
Horn button (FE EU)
F00260-11
Light switch (FE EU)
F00260-12
Light switch (FE US)
M00355-10
(FE US)
1
The stop button
is fitted on the left side of the handlebar.
Possible states
is in the basic position – In this position,
•
The stop button
the ignition circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit
•
Stop button
is interrupted, a running engine stops, and a non-running
engine will not start.
1
Horn button
is fitted on the left side of the handlebar.
Possible states
•
The horn button
is in the basic position
is pressed – The horn is operated in this
•
The horn button
position.
1
Light switch
is fitted on the left side of the handlebar.
Possible states
Low beam on – Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on – Light switch is turned to the left.
In this position, the high beam and the tail light are
switched on.
1
The light switch
is located to the left of the combination
instrument.
Possible states
Light off – Light switch is pressed in up to the stop. In this
•
position, the light is switched off.
Light on – Light switch is pulled out to the stop. In this posi-
•
tion, the low beam and tail light are switched on.