Horn Button (All Eu Models); Light Switch (All Eu Models); Light Switch (Fe 501 Us) - Husqvarna FE 450 EU 2020 Owner's Manual

6 CONTROLS
6.5
6.6
6.7
18
S03586-10

Horn button (All EU models)

F00260-11

Light switch (All EU models)

F00260-12

Light switch (FE 501 US)

F02334-10
(FE 501 US)
1
Switch-off button is fitted on the left side of the handle-
bar.
Possible states
• The switch-off button
position, the ignition circuit is closed and the engine can be
started.
• The switch-off button
ignition circuit is interrupted, a running engine stops, and
a non-running engine will not start.
1
Horn button is fitted on the left side of the handlebar.
Possible states
• The horn button is in the basic position
is pressed – The horn is operated in this
• The horn button
position.
1
Light switch is fitted on the left side of the handlebar.
Possible states
Low beam on – Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on – Light switch is turned to the left.
In this position, the high beam and the tail light are
switched on.
1
The light switch is located to the left of the combination
instrument.
Possible states
Light off – Light switch is pressed in up to the stop. In this
•
position, the light is switched off.
Light on – Light switch is pulled out to the stop. In this posi-
•
tion, the low beam and tail light are switched on.
is in the basic position – In this
is pressed – In this position, the