If a turn signal light fails, the warning light flashes at twice its normal rate.
Switching off the hazard warning light system is switched on will cause all of the
turn signal lights as well as both warning lights to flash.
Further information
» page
43, Turn signal and main beam lights.
Low beam
First read and observe the introductory information and safety warn-
ings
on page 20.
The warning light
comes on when low beam is selected
Fog lights
First read and observe the introductory information and safety warn-
ings
on page 20.
The warning light
comes on when the fog lights are operating
Cruise control system
First read and observe the introductory information and safety warn-
ings
on page 20.
The warning light
comes on when the cruise control is operating
Selector lever lock
First read and observe the introductory information and safety warn-
ings
on page 20.
If the warning light
lights up, operate the brake pedal. This is necessary to be
able to move the selector lever from position P or N
» page
41.
» page
44.
» page
113.
» page
101.
Main beam
First read and observe the introductory information and safety warn-
ings
on page 20.
The warning light
comes on when the main beam or headlight flasher are se-
lected
» page
43.
Instruments and Indicator Lights
27