Entering The Ip Address - HP jetdirect 175x Administrator's Manual

Hp jetdirect 175x printer-accessory: user guide
Hide thumbs Also See for jetdirect 175x:
Table of Contents

Advertisement

1. Run a supported Web browser.
2. Enter the IP address of the print server as the URL.
Figure 4.3 Entering the IP Address
3. If prompted with security alerts, click Yes to proceed.
For full-featured wired print servers, the embedded Web server
uses standard HTTP for initial access. However, they may be
configured to appear as a secure site using an installed
X.509-compliant certificate for identification. When properly
configured, encrypted browser communications through HTTPS
(secure HTTP) may be used for secure access.
For full-featured wireless print servers, the embedded Web
server will appear as a secure site for initial access. By default,
encrypted browser communications through HTTPS is initially
required. A factory-installed, self-signed certificate (X.509
compliant) is used for device identification.
Although not recommended, you can use your Internet
Options menu to configure your browser to ignore security
warnings if the print server is configured to operate through
HTTPS. See
Value-based, non-upgradeable HP Jetdirect print servers (for
example HP Jetdirect 175x and 200m) do not support a secure
embedded Web server.
4. An embedded Web server page will be displayed, either the
Home page of the HP Jetdirect print server or a device page
served by a Web server on the device.
ENWW
Mgmt.
Protocols.
Using the Embedded Web Server 107

Advertisement

Table of Contents
loading

Table of Contents