Setting An Ip Address - HP Jetdirect 280m - 802.11b Wireless Print Server User Manual

HP Jetdirect 280m user's guide
This will print out the current value of the print server's configuration parameters
on the attached printer. The section on
help you understand the meaning of the items on the configuration page.

Setting an IP address

The easiest way to set an IP address on the print server is to use the embedded web
server. (You should consult with your network administrator before you make any
changes to the print server's configuration, and notify other users of any change
you will make.)
To set an IP address:
1. Open your browser and enter the print server's IP address as the URL. (If
you don't know the IP address, you can find it by
page.)
2. Click on the Networking tab in the page that appears.
3. On the Networking page, make sure that TCP/IP is selected.
4. Set the IP Configuration Method to Manual.
5. Enter the new IP address in the IP Address box.
Note that you will lose your connection to the embedded web server when you
change the IP address. To re-establish the connection, enter the new IP address in
your browser's URL field.
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWTECHNQ.HTM (4 of 5) [5/20/2003 4:05:05 PM]
Interpreting the Configuration Page
printing a configuration
will