Chapter 3 Configuring and managing the print server on your network
Useful Techniques
Printing a configuration page
Setting a new IP address
3-4
•
DLC/LLC: Can be enabled or disabled; otherwise there are no parameters to set on
the Jetdirect module.
•
AppleTalk: Printer Name and Printer Zone parameters can be set up using the HP
LaserJet Utility for MacOS.
•
SNMP: (Simple Network Management Protocol) used with your configuration and
management tools. The Jetdirect-specific MIB (Management Information Base) is
MIB-II compliant; it is available upon request from HP Support.
•
Printing a configuration page
•
Setting a new IP address
•
Resetting to factory-default settings
Briefly press and release the test button on the rear end of the print server. The page
should soon emerge from the attached printer. Refer to "Interpreting the configuration
page and diagnosing problems" in chapter 4, Troubleshooting.
The procedure depends on whether you are changing the address to one on the same
network or on another network (and need to ensure the address doesn't conflict on the
new network).
User Guide