HP jetdirect 175x Administrator's Manual page 284

Table C.2 HP Jetdirect Graphical Control Panel Menu (2 of 7)
Menu Item Options
AUTHENTICATION
CONFIGURE EAP
ENWW
Description of settings
Choose one of the following authentication
methods for your network:
OPEN SYSTEM: Network authentication is
not required or used.
SHARED KEY: Requires a WEP encryption
key on each device on your wireless
network. Use the CONFIGURE KEYS
menu to configure WEP encryption keys.
EAP/802.1x: Requires configuration of
Extensible Authentication Protocols in
combination with an authentication server
used on your network. Use the
CONFIGURE EAP menu to configure EAP
protocols. EAP/802.1x configuration
options may require a password, which
may be set using the Security menu.
EAP/PSK: Requires configuration of a
Pre-Shared Key when Extensible
Authentication Protocols are used without
an authentication server on the network.
Use the CONFIGURE PSK menu to
generate a Pre-Shared Key.
This menu is available if EAP Authentication
has been selected. The following
authentication protocols can be enabled:
I LEAP
I PEAP
I EAP-MD5
I EAP-TLS
I EAP-TTLS
You may enable multiple protocols
simultaneously if required by your network.
However, each protocol enabled may require
additional configuration.
For each authentication protocol, the
following options are available:
OFF (default): Disabled
ON: Enabled
For PEAP, EAP-TLS, EAP-TTLS,
"CERT. REQUIRED" may appear, indicating
that digital certificate information must be
preinstalled on the print server.
The HP Jetdirect Control Panel Menu 284