HP jetdirect 175x Administrator's Manual page 115

Hp jetdirect 175x printer-accessory: user guide
Hide thumbs Also See for jetdirect 175x:
Table of Contents

Advertisement

Table 4.3
802.11B Configuration Parameters (3 of 7)
Item
Enable Protocols
User Name
Password,
Confirm
Password
ENWW
Description
Enable (check) or disable (clear) the EAP protocols supported by
the print server.
LEAP: (Lightweight Extensible Authentication Protocol). LEAP is
a Cisco Systems, Inc. proprietary protocol. LEAP requires an EAP
User Name and EAP Password. Dynamic encryption keys are
also used.
PEAP: (Protected Extensible Authentication Protocol). PEAP
uses digital certificates for network server authentication and
passwords for client authentication. PEAP requires an EAP User
Name, EAP Password, and CA Certificate. Dynamic encryption
keys are also used.
MD5: (EAP using Message Digest Algorithm 5, RFC 1321).
EAP-MD5 uses a password protected by the MD5 encryption
algorithm. For MD5, enter an EAP User Name and EAP Password.
Static encryption keys are also used. .
TLS: (EAP using Transport Layer Security, RFC 2716). EAP-TLS
uses X.509-compliant digital certificates for both client and
network server authentication. TLS requires an EAP User Name,
Jetdirect Certificate, and CA Certificate. Dynamic encryption keys
are also used.
TTLS: (EAP using Tunneled Transport Layer Security).
EAP-TTLS is an EAP-TLS extension that also uses
X.509-compliant digital certificates. TTLS requires an EAP User
Name, EAP Password and CA Certificate. Dynamic encryption
keys are also used.
<Custom>: While specific configuration is not required, a unique
combination of User Name, Password and digital certificates for
EAP authentication may be specified.
Specify an EAP/802.1x user name (up to 128 characters
maximum) for this device. The default user name is the default
host name of the print server, NPIxxxxxx, where xxxxxx are the
last six digits of the LAN hardware (MAC) address.
Specify an EAP/802.1x password (up to 128 characters
maximum) for this device. Enter the password again in the Confirm
Password field to ensure it was properly entered.
Using the Embedded Web Server 115

Advertisement

Table of Contents
loading

Table of Contents