HP jetdirect 175x Administrator's Manual page 89

Hp jetdirect 175x printer-accessory: user guide
Hide thumbs Also See for jetdirect 175x:
Table of Contents

Advertisement

Table 3.4
Telnet Commands and Parameters (9 of 18)
defaultq
addstring
deletestring
TCP/IP Raw Print Ports
Command
raw-port
TCP/IP Access Control
Command
allow
TCP/IP Other Settings
Command
syslog-config
syslog-svr
ENWW
Name of the queue to be used if the queue specified for a
print job is unknown. By default, the default queue is AUTO.
Adds a user-defined character string that may be prepended
or appended to print data. Up to eight character strings may
be specified. A string name and the character string contents
are specified in the addstring command line.
Deletes a user-defined string. The string name is specified
in the deletestring command line.
Description
Specifies additional ports for printing to TCP port 9100. Valid
ports are 3000 to 9000, which are application-dependent.
Up to two ports can be specified.
Description
Makes an entry into the host access list stored on the
HP Jetdirect print server. Each entry specifies a host or
network of hosts that are allowed to connect to the printer.
The format is "allow netnum [mask]" where netnum is a
network number or host IP address, and mask is an address
mask of bits applied to the network number and host address
to verify access. Up to 10 access list entries are allowed. If
there are no entries, all hosts are permitted access. For
example,
allow 192.0.0.0
allows hosts on network 192.
allow 192.168.1.2
allows a single host. In this case, the default mask
255.255.255.255 is assumed and is not required.
allow 0 clears the host access list.
For additional information, see
Description
Enables or disables syslog server operation on the print
server: 0 disables, 1 (default) enables. (UDP port 514)
The syslog server's IP address in dotted notation. It specifies
the server that the HP Jetdirect print server sends syslog
messages to. For example,
syslog-svr: 192.168.40.1
assigns 192.168.40.1 as the IP address of that server.
For more information, see
255.0.0.0
Chapter
7.
Appendix
A.
TCP/IP Configuration 89

Advertisement

Table of Contents
loading

Table of Contents