HP jetdirect 175x Administrator's Manual page 234

Table 9.12 Error Messages (3 of 11)
Error Code and
Message
10 LAN ERROR -
UNDERFLOW
10 LAN ERROR-AUTO
REMOVAL
11 LAN ERROR -
RETRY FAULTS
11 LAN ERROR -
REMOVE RECEIVE
12 LAN ERROR -
NO LINKBEAT
13 NETWORK
RECONFIG - MUST
REBOOT
14 DISCONNECTED
15 CONFIGURATION
ERROR
16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been
ENWW
Description
(Wired Ethernet) There may be a problem with your network
cabling or the HP Jetdirect print server. Check the cabling
and connectors on your network. If you cannot find a
problem with your network cabling, run the power-on
self-test: turn the printer off, then on again. If the error
persists, there is a problem with the HP Jetdirect print
server.
(Token Ring) The HP Jetdirect print server detected an
internal hardware error following the Token Ring beacon
auto-removal process and has removed itself from the ring.
(Wired Ethernet) There is a problem with your network
cabling or external network configuration. Verify operation
of the hub or switch port.
(Token Ring) The HP Jetdirect print server has received a
Remove Adapter data frame during the Token Ring insertion
process, or has received a remove ring station data frame
request, and has removed itself from the ring.
With a 10/100 Base-TX port connected, this message is
displayed if Link Beat is not sensed. Check the network
cable, and verify that the concentrator/hub is providing Link
Beat.
Reset or power off/on the HP Jetdirect print server to enable
new configuration values.
The Novell NetWare protocol is disconnected. Check the
server and the print server.
(Ethernet) The configuration information for the NetWare
functions is not stored correctly on the HP Jetdirect print
server. Use the installation software, embedded Web
server, or other tools to reconfigure the print server. If this
error persists, there may be a problem with the HP Jetdirect
print server.
configured for NetWare. Use the installation software,
embedded Web server, or other tools to configure the print
server for NetWare networks.
HP Jetdirect Configuration Page 234