Operating Notes - HP jetdirect 175x Administrator's Manual

Hp jetdirect 175x printer-accessory: user guide
Hide thumbs Also See for jetdirect 175x:
Table of Contents

Advertisement

Operating Notes

G
If you enter or change a configuration parameter value, click
Apply to enable your change, or click Cancel to erase your
change.
G
Changes to the IP address will close the connection to the
embedded Web server. To re-establish a connection, use the new
IP address.
CAUTION
G
The embedded Web server provides access to wireless network
connection parameters on HP Jetdirect wireless print servers.
CAUTION
G
Features and configuration parameters not supported by
value-based print servers, such as HP 175x and 200m, will not
appear.
G
Novell NetWare networks: On the Network Settings page, use
the IPX/SPX tab to configure Novell Directory Services (NDS)
Queue Server mode parameters. Note that the embedded Web
server cannot create NDS objects (print server, printer, and print
queue objects) on the Novell server. To create these objects, use
a Novell NetWare utility, such as NWAdmin, or configure the
IPX/SPX stack for NDS through HP utilities, such as the HP
Install Network Printer Wizard or HP Web Jetadmin.
ENWW
Changes to the IP address on the HP Jetdirect print
server may result in printing failures for clients
that have been configured to print to this printer
using the previous IP address.
If you change the wireless network settings, you
may lose your connection. To reconnect, you may
need to adjust your system to the new settings.
If the print server loses its network connection, you
may need to reset it to a factory-default state and
reinstall it.
Using the Embedded Web Server 108

Advertisement

Table of Contents
loading

Table of Contents