HP jetdirect 175x Administrator's Manual page 281
Hp jetdirect 175x printer-accessory: user guide
Hide thumbs
Also See for jetdirect 175x:
- User manual (142 pages) ,
- Administrator's manual (302 pages) ,
- Manuallines (33 pages)
Table of Contents
Advertisement
Table C.1
HP Jetdirect Classic Control Panel Menu (5 of 6)
Menu Item
CFG TCP/IP=
CFG IPX/SPX=
ENWW
Description
Selects whether you want to access the TCP/IP menu and set
TCP/IP protocol parameters.
NO (default): Bypass the TCP/IP menu items.
YES: Access the TCP/IP menu items.
G
BOOTP=YES* enables configuration by a BootP Server.
G
DHCP=YES* enables configuration by a DHCP Server.
If DHCP=YES* and the print server has a DHCP lease, you
can choose to configure the following DHCP settings:
I
RELEASE: Choose YES to release, or NO to save, the
current DHCP lease.
I
RENEW: Choose YES to renew the current DHCP lease,
or NO to not renew the DHCP lease.
G
AUTO IP=YES* will automatically assign a link-local address
in the form 169.254.x.x.
If you specify BOOTP=NO*, DHCP=NO* and AUTO IP=NO*, you
can manually set the following TCP/IP parameters from the
control panel:
I
Each byte of the IP address (IP)
I
Subnet Mask (SM)
I
Syslog Server (LG)
I
Default Gateway (GW)
I
Idle Timeout period (default is 270 seconds, 0 disables the
timeout)
G
(620n Only) CFG DNS=YES* will allow you to specify the IP
address of a DNS server, one byte at a time.
Print a Jetdirect configuration page to verify your settings.
However, note that the print server may overwrite selected
parameters with values that ensure proper operation.
Selects whether you want to access the IPX/SPX menu and set
IPX/SPX protocol parameters.
NO (default): Bypass the IPX/SPX menu items.
YES: Access the IPX/SPX menu items.
In the IPX/SPX menu, you can specify the Frame Type parameter
used on your network.
I
AUTO (default) will automatically set and limit the frame
type to the first one detected.
I
For Ethernet cards, frame type selections include
EN_8023, EN_II, EN_8022, EN_SNAP.
I
For Token Ring cards, frame type selections include
TR_8022, TR_SNAP.
In the IPX/SPX menu for Token Ring cards, you can also specify
NetWare Source Routing parameters, which include SRC
RT=AUTO (default), OFF, SINGLE R, or ALL RT.
The HP Jetdirect Control Panel Menu 281
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
