HP jetdirect 175x Administrator's Manual page 95

Hp jetdirect 175x printer-accessory: user guide
Hide thumbs Also See for jetdirect 175x:
Table of Contents

Advertisement

Table 3.4
Telnet Commands and Parameters (15 of 18)
ipx-toner-low
source-route
AppleTalk Settings
Command
appletalk
name-override
Name
Print Type
Zone
Phase
Status
ENWW
Enables or disables IPX toner-low notification through PJL.
0 disables, 1 (default) enables.
(Token Ring only) Configures the HP Jetdirect print server
with the IPX/SPX source routing used on the network.
auto (default): Source routing is automatically sensed from
the network.
off: Packets are transmitted without source routing. The print
server will only respond to stations on the same ring.
single r: All packets are sent with source routing. The Single
Route method is used for broadcasts and when the route is
unknown.
all rt: All packets are sent with source routing. The All Routes
method is used for broadcasts and when the route is
unknown.
Description
Enables or disables AppleTalk (EtherTalk) protocol
operation on the print server. 0 disables, 1 (default) enables.
For example,
at-config 0 will disable AppleTalk operation
(External print servers only) Specifies the name of the
AppleTalk network. Up to 32 characters may be used.
(Read-only parameter) The name of the printer on the
AppleTalk network. A number after the name indicates that
there are multiple devices with this name, and this is the Nth
instance of the name.
(Read-only parameter) Specifies the AppleTalk network
printer type reported by the Jetdirect print server. Up to three
print types may be reported.
(Read-only parameter) The name of the AppleTalk network
zone on which the printer is located.
(Read-only parameter) AppleTalk phase 2 (P2) is
preconfigured on the HP Jetdirect print server.
(Read-only parameter) Indicates the current AppleTalk
configuration status.
READY: Indicates the HP Jetdirect print server is awaiting
data.
DISABLED: Indicates that AppleTalk was manually
disabled.
INITIALIZING: Indicates that the print server is registering
the node address or name. An additional status message
may also be displayed.
TCP/IP Configuration 95

Advertisement

Table of Contents
loading

Table of Contents