HP jetdirect 175x Administrator's Manual page 154

Hp jetdirect 175x printer-accessory: user guide
Hide thumbs Also See for jetdirect 175x:
Table of Contents

Advertisement

Table 4.13
Other Protocols (2 of 2)
Item
Enable Device
Discovery
Enable Management
Protocols
Wireless
Use this link to manage secure wireless configuration settings. For
the features and parameter settings on this page, see
Network Statistics
This page is used to display counter values and other status
information currently stored on the HP Jetdirect print server. This
information is often useful to diagnose performance and operational
problems associated with the network or network device.
ENWW
Description
Enable or disable device discovery protocols supported by
the print server:
SLP (Service Location Protocol).
If enabled (checked), the HP Jetdirect print server
sends SLP packets, which are used by system
applications for automated discovery and installation.
If disabled (cleared), SLP packets are not sent.
mDNS (multicast Domain Name System).
If enabled (checked), Multicast Domain Name System
(mDNS) services are provided. mDNS is typically used
on small networks for IP address and name resolution
(through UDP port 5353) where a conventional DNS
server is not used.
Multicast IPv4.
If enabled (checked), the print server will send and
receive IP version 4 multicast packets.
Enable or disable Telnet access and the use of FTP to
upgrade firmware on the print server. Telnet and FTP are
not secure protocols and device passwords may be
intercepted.
Enable or disable RCFG, a remote IPX configuration
protocol used by older management tools to configure
Novell NetWare parameters. Disabling RCFG does not
affect direct mode printing using IPX/SPX.
Disabling Telnet, FTP firmware upgrades, and RCFG is
recommended.
Using the Embedded Web Server 154
Table
4.3.

Advertisement

Table of Contents
loading

Table of Contents