HP jetdirect 175x Administrator's Manual page 88

Hp jetdirect 175x printer-accessory: user guide
Hide thumbs Also See for jetdirect 175x:
Table of Contents

Advertisement

Table 3.4
Telnet Commands and Parameters (8 of 18)
TCP/IP Print Options
Command
9100-printing
ftp-printing
ipp-printing
lpd-printing
banner
interlock
mult-tcp-conn
buffer-packing
write-mode
TCP/IP LPD Queues
Command
addq
deleteq
ENWW
Description
Enables or disables printing to TCP port 9100 on the print
server. 0 disables, 1 (default) enables.
Enables or disables the ability to print through FTP. 0
disables, 1 (default) enables. (TCP ports 20, 21)
Enables or disables the ability to print using IPP. 0 disables,
1 (default) enables. (TCP port 631)
Enables or disables the ability to print using LPD. 0 disables,
1 (default) enables.(TCP port 515)
Enables or disables printing an LPD banner page. 0 disables
banner pages. 1 (default) enables banner pages.
Specifies whether an acknowledgement (ACK) on all TCP
packets is required before the printer is allowed to close a
Port 9100 print connection. To accommodate multiport print
servers, a Port Number and Option value are specified. Port
Numbers can be 1 (default), 2, or 3. Option value 0 (default)
disables interlock, 1 enables. For example,
1 specifies Port 2, interlock enabled.
interlock 2
(Restrict Mult Prt) Enables or disables multiple TCP
connections.
0 (default): allows multiple connections.
1: disables multiple connections.
Enables or disables buffer packing for TCP/IP packets.
0 (default): is normal, the data buffer is packed before
sending to the printer.
1: disables buffer packing, data is sent to the printer as it is
received.
Controls the setting of the TCP PSH flag for device-to-client
data transfers.
0 (default): disables this option, flag is not set.
1: all-push option. The push bit is set in all data packets.
2: eoi-push option. The push bit is set only for data packets
that have an End-of-Information flag set.
Description
Adds a user-defined queue. The queue name (up to 32
displayable ASCII characters), prepend string name,
append string name, and processing queue (typically, RAW)
must be specified in the command line. Up to six
user-defined queues may be added.
Delete a user-specified queue. The queue name must be
specified in the deleteq command line.
TCP/IP Configuration 88

Advertisement

Table of Contents
loading

Table of Contents