Table of Contents
Advertisement
General
Principle
The FDV 80 carriage forms the basis of a mobile longitudinal welding system, consisting
of a straight-line carriage, control unit, torch head and weld tracking.
Device concept
The modular design enables the carriage to be equipped for a wide range of
applications.
A flexible system consisting of rails and swivelling units, along with a mechanical weld
tracking system, enables welding to take place on parallel workpieces as well as on
workpieces that are bent, diverge or are tapered.
The job is selected directly using the remote control.
The carriage is powered by a mains cable.
Field of
The FDV 80 carriage can be used in all situations where a high degree of flexibility is
application
required when executing longitudinal weld seams:
-
-
-
Proper use
The FDV 80 carriage must only be used for creating mechanised butt and fillet welds in a
horizontal welding position.
Any other use shall be deemed improper and the manufacturer will assume no
responsibility for any damages arising.
Can be used in the following welding processes:
-
Proper use also includes:
-
-
-
-
-
Welding of longitudinal members
Shipyards
Production halls
MIG / MAG process
Carrying out all maintenance work at the appropriate intervals
Keeping a service book with the most important information (date, operator, activities
carried out)
Using the spare parts stipulated by Fronius
Following all the information in the operating instructions
Using this document in combination with the operating instructions for the integrated
system components (power source, wire-feed unit, etc.)
NOTE! Any use of the machine other than for its intended purpose or any
unauthorised conversion or modifications, shall be deemed improper use.
Any liability or warranty from the manufacturer is hereby invalidated.
3
Advertisement
Table of Contents
