Instrument Base - Zeiss KSK 150 FC Instructions For Use Manual

KSK 150 FC

Instrument base

Version 7.1
G-30-1158-en
The device base of the standard configuration is the movable floor stand
shown below.
Optionally, the colposcope can be attached to examination chairs using spe-
cial mounts (connection tubes).
Colposcope floor stand
Five easily movable, stable casters are attached to the colposcope floor stand.
These casters can be locked for safe positioning.
The casters can be locked by pressing down tabs (1). To release the casters,
press the locking tabs up again.
The required working height of the support unit can be set by means of
locking ring (2) on the column.
Mounts on examination chairs (option)
Special connecting tubes permit the connection of the colposcope to various
types of examination chairs. For some common types of examination chairs,
you can order the mounts from ZEISS, see the section on "Ordering data".
Please contact the ZEISS subsidiary in your country.
You can also ask the manufacturer of your examination chair for connection
tubes for colposcopes.
2
1
System Overview
1
1
1
1
Page 33