Labeling, Warnings, Notes And Symbols - Zeiss KSK 150 FC Instructions For Use Manual

Safety Measures

Labeling, warnings, notes and symbols

NOTE
R021
max.2.1 kg
Page 16
Observe the warning labels and signs!
• If you notice that any label is missing on your device or has become illeg-
ible, please contact us or one of our authorized representatives. We will
supply you with replacements.
Warning and information labels, explanation and positioning
1 Label "Brake released / applied"
Label on the knob for adjusting the friction of the rotation and tilt mo-
tions.
2 Label "Risk of crushing"
Fingers may be crushed in this area. Do not touch this area while the col-
poscope is being moved.
3 Transport position
Certain precautions must be observed for transportation or lifting of the
device. Please refer to the relevant information in the Instructions for Use.
• This imprint on the housing informs you of the correct transport posi-
tion. Before transporting the system, make sure that it is in this posi-
tion in order to avoid any damage.
4 Power switch
The two positions of the power switch are marked as shown in the illus-
tration on the left.
5 Balance of suspension arm
After all accessories have been attached to the colposcope, this adjust-
ment screw can be used to set the balance of the suspension arm.
6 "Maximum load" warning label
Maximum load capacity 2.1 kg with asymmetric load distribution.
For maximum load capacity with asymmetric load distribution see
Page 69.
KSK 150 FC
Version 7.1
G-30-1158-en