Zeiss KSK 150 FC Instructions For Use Manual page 25

KSK 150 FC
Version 7.1
G-30-1158-en
can turn out the eyecups of the eyepieces.
Objective lens
The standard objective lens has a focal length of 300 mm.
Alternatively, an objective lens with a focal length of f = 250 mm is available.
Magnification changer
5-step mechanical magnification changer
Illumination system
The colposcope features a cold-light illuminator.
The halogen light source and the relevant power supply unit are integrated
into the support unit. The brightness can be set via a knob on the carrier arm.
An integrated light guide directs the light to the illumination system of the col-
poscope. The light guide is routed completely in the suspension system.
Green filter
The green filter can be swung in and out of the beam path by means of a lever
in the device head.
Support unit
The support unit (carrier arm, suspension arm and device head) is supplied
completely assembled.
Accessories
Numerous accessories are available for the colposcope and can be ordered to-
gether with the device or as retrofitting components; please also see the sec-
tion "Ordering data". You can find additional accessories in the "ZEISS video
accessories" product overview (G-30-1888).
To support the visualization of surgical procedures and examinations, your
colposcope can be equipped with HD video, for example. The 1Chip HD
Camera is integrated for this purpose.
The optional HD video equipment consists essentially of the 1Chip HD Camera
on a beam splitter and the camera control unit (CCU). Standard interfaces
allow the beam splitter to be installed between the microscope and the bin-
ocular tube.
Recording devices and monitors can be connected to the video output ports
of the camera control unit (CCU). You will receive separate Instructions for Use
for the "1Chip HD Camera" (G-30-1946).
System Overview
Page 25