Controls, Support Unit - Zeiss KSK 150 FC Instructions For Use Manual

System Overview

Controls, support unit

Page 28
1 "Instrument head" friction knob
Locks the rotational movement of the instrument head.
2 "Inclination" friction knob
Fixes the instrument head in any inclined position desired.
3 Handgrip
To position the colposcope.
4 "Brake" adjusting knob
Adjusts the brake for vertical movement of the suspension arm. Clockwise
rotation increases the brake effect, while counterclockwise rotation re-
duces it.
5 "Balance setting" adjusting knob
For setting the balance of the suspension arm and locking the suspension
arm when changing accessories.
6 "Brightness" knob
For continuous adjustment of the lamp brightness:
– Rotated clockwise - brighter illumination
– Rotated counterclockwise - darker illumination
7 Power switch with power display
The device is switched on or off by pressing this toggle switch:
– Position "I": device switched on, indicator lamp is lit.
– Position "0": device switched off, indicator lamp is off.
8 Cover of "halogen illumination"
The lamp base with the halogen reflector lamp (12V 100W) is accommo-
dated behind the cover.
9 Securing screw for "cover of halogen illumination"
To lock the "halogen illumination" cover.
10 "Rotational motion" friction knob
For the simultaneous locking of the rotational movement of the carrier
and suspension arms
KSK 150 FC
Version 7.1
G-30-1158-en