Controls, Colposcope - Zeiss KSK 150 FC Instructions For Use Manual

System Overview

Controls, colposcope

Page 30
1 Eyepieces
The standard eyepieces feature 10x magnification. Alternatively, eye-
pieces with a magnification of 12.5x are available.
2 Inclined binocular tube and eyepieces
The 45° inclined binocular tube with a focal length of f = 170 mm is the
standard tube. Alternatively, a binocular straight tube or a tiltable binoc-
ular tube is available.
3 The 1Chip HD Camera (option) is securely mounted on the optical splitter
and has a connector for the video cable.
4 "Fine focusing" adjusting ring
5 Handgrip on the instrument head
To position the colposcope.
6 Adjusting the interpupillary distance
Knob (on both sides of the binocular tube) for the user-defined setting of
the interpupillary distance
7 Connector port for coobservation
8 "Green filter" lever
For swiveling the green filter into and out of the illumination beam path.
The user can easily reach the lever with one finger without removing his
hand from the handgrip.
9 Securing screw
To secure the binocular tube or another module inserted into the mount
of the colposcope.
10 Holes for fastening the front adapter
The holes can be used to attach the front adapter MM 4 / 150 FC (adapter
for laser micromanipulator.
11 Interchangeable objective lens
The objective lens of the basic equipment has a focal length of
f = 300 mm. Alternatively, an objective lens with a focal length of
f = 250 mm is available.
12 "Magnification changer" knob
For setting one of the five magnification steps. An objective lens
f = 300 mm and eyepieces with 10x magnification permit setting of the
magnification steps 2x, 3x, 6x, 9x and 14x.
KSK 150 FC
Version 7.1
G-30-1158-en