Using The Fingerprint Scanner; Registering Fingerprints At The Device; Logging On Using The Fingerprint Scanner - eCopy imageFORMULA ScanFront 220e Installation And Setup Manual

|
156 Reference: Using eCopy Connectors

Using the fingerprint scanner

To configure the fingerprint scanner you must:
Use the ShareScan Administration console to configure Session Logon (see page 42) and
■
enable Activity Logging (see page 147) and ID Services (see page 153).
Register user fingerprints at the device.
■

Registering fingerprints at the device

The first time a user tries to use the fingerprint scanner, the device checks to see if the fingerprint
is already registered in its database. If the fingerprint is not found, the Fingerprint Registration
Wizard opens.
To register a fingerprint:
With the Fingerprint Registration Wizard open, swipe your finger three times across the
1
fingerprint scanner.
All three fingerprint swipes must match. If any fingerprint swipes do not match, press
Retry and then repeat the process.
When the fingerprints match, click Next.
2
The Login Information window opens.
Enter your user name, password, and domain, and then click Test.
3
The information is authenticated and is then associated with the scanned fingerprint.
Click Save to store the information.
4
The next time you use the device you can use the fingerprint scanner to log on.

Logging on using the fingerprint scanner

Make sure that Session Logon is configured, before you try to log on using the fingerprint
scanner. The fingerprint scanner only works when the Session Logon screen is displayed.
To log on using the fingerprint scanner:
When the device displays the Session Logon screen, swipe your finger across the
1
fingerprint scanner.
A window shows the progress of the authentication process.
When the main ShareScan client screen appears, continue scanning your document.
2
Notes:
If your fingerprint is already registered and the Registration screen appears when you try to log on using the
■
fingerprint scanner, click Cancel and re-swipe your finger.
If your password has changed, the Fingerprint Registration Wizard will prompt you to enter the new
■
password when you swipe your finger.