Table of Contents
Advertisement
|
144
Reference: Managing eCopy-enabled devices
Specifying a default device
You can specify a default device from which new devices inherit their initial configuration of
connector profiles. For example, if the default device is configured to use the Exchange and Scan
to Printer connectors, new devices are automatically configured to use the same connectors.
Note:
Devices can only inherit connector profiles from a default device from the same manufacturer.
If you do not specify a default device, new devices will not be configured to use any connectors.
To specify the default device:
In the console tree, right-click the device name.
1
Select Set as default device.
2
Advertisement
Table of Contents
