Table 34. Ldap/Smtp Properties: Smtp Settings Tab - eCopy imageFORMULA ScanFront 220e Installation And Setup Manual

TABLE 34. LDAP/SMTP Properties: SMTP Settings tab

Section Field/Button
SMTP Server Server
Port
Mail Account Allow user to
(For Mail via select recipients
SMTP using
LDAP only.)
Send to self
SMTP Server None
Logon
Use Sender's User
Available only if
ID, LDAP
SMTP Basic
Attribute, and
Authentication is
runtime password
enabled on the
server.
Login As
Note: If Session
Logon is
enabled, and SSL
is not enabled,
Runtime: Prompt
eCopy
Sender for a user
recommends
name and
that you select
password
"None" or
"Login As".
eCopy ShareScan
Description
The IP address or DNS name of the SMTP server to use for outgoing
messages. If the server supports anonymous access, it must be
disabled if you want to use SMTP authentication.
The SMTP port number (default is 25).
Enables the user at the device to select recipients for the scanned
documents:
Allow user to add recipients to Cc list: Enables the user at the
■
device to send a copy of a message to one or more recipients
who are not the primary recipients.
Send copy to Sender: Automatically delivers a copy of the
■
message to the person specified in the From field.
Disables the list of recipients and sends the scanned documents only
to the logged on user.
Use if the SMTP server does not require authentication.
Uses the sender's LDAP authentication information to connect to the
SMTP server.
Enables the user at the device to connect to the SMTP server without
being prompted for authentication information. The connector uses
the specified user name and password.
Prompts the user at the device to enter a user name and password
when the user presses the Send button on the Send screen.
®
Installation and Setup Guide
|
121