Table of Contents
Advertisement
TABLE 18. Services: Document Settings tab (continued)
Option
Setting
Document
Default
Name
Specify
Name
Advanced
User
modify
Blank Page
On
Removal
(for black-
and-white
documents
only)
Off
Threshold
User
modify
Description
The default naming format for the scanned documents:
DeviceName_ConnectorID_<DateTime>.ext
Specifies a default file name for the scanned documents.
Specifies the fields that are used to build a file name for the scanned documents.
You use the Add/Edit File Name Fields window and the Field Editor to specify the
fields. See the Advanced file naming settings topic in the Help for more
information.
The system adds the Authenticated User name to the file name only if Session
Logon is enabled.
The user can override the default setting. Only available if you select the Specify
Name option.
Removes blank pages from the scanned documents when the file size is within
the range specified in the Threshold field.
Canon ScanFront devices have a scanner setting called "Skip Blank Page" that
removes blank pages based on analysis of the content of each page. Therefore, if
a user enables the Skip Blank Page option at the device, blank pages will be
removed based on content, not on file size. In this case, the Services Manager will
not need to use the Blank Page Removal setting because the pages will have been
removed during scanning.
Retains blank pages in the scanned documents.
If Blank Page removal is set to "On", the Threshold value is the size of the file, in
kilobytes, that triggers a search for blank pages. The threshold can be an absolute
value or a range, for example: "10" or "10-25".
The user can override the default setting.
®
eCopy ShareScan
Installation and Setup Guide
|
83
Advertisement
Table of Contents
