Table of Contents
Advertisement
To configure eCopy Connector for Microsoft Exchange services:
In the console tree, select Exchange > Services.
1
The Services pane appears.
Configure the connector services (see page 80).
2
Click Save, select the profile name, and then click Save.
3
To add additional account forests:
This procedure applies only to environments that use an External Associated Account (EAA) and
contain multiple forests.
After using the Wizard to configure your environment settings, select Properties on the
1
Configure tab and then select the Advanced Settings tab.
Make sure that the current protocol matches the protocol for your environment.
2
If you change the protocol, the system will prompt you to re-enter the user credentials on
the Basic Settings tab (Table 24).
Select Use External Associated Account.
3
The Resource Forest Settings window opens.
Enter the Global Catalog Server information (see Table 28) and then click OK.
4
In the Exchange Properties pane, the Additional Account Forests section becomes
active.
Click New.
5
The Account Forest Settings window opens.
Enter the Account Forest and Service Account information for the new account forest.
6
Click Test.
7
When the test is successful, click OK.
8
The new account forest is added to the list.
Click OK to return to the Configure tab.
9
®
eCopy ShareScan
Installation and Setup Guide
|
95
Advertisement
Table of Contents
