eCopy imageFORMULA ScanFront 220e Installation And Setup Manual page 124

|
116 Reference: Connector-specific configuration information
TABLE 31. Wizard settings: SMTP using LDAP (continued)
Wizard Window
Search Settings
SMTP Settings
Field Description
Start Search The node on the LDAP tree from which all searches should begin. If
At you do not know the node, click the Browse button and then select
the node from the tree structure in the selection window.
Search scope Select a search level:
All levels below search starting point: Allows expanded searching.
■
One level below search starting point: Optimizes LDAP queries and
■
improves performance.
Sender Search The search criterion that the server uses to find the sender:
First Name
■
Last Name
■
Common Name
■
User ID
■
The setting defines the information that the user sees on the Logon
screen at the device.
Recipient The search criterion that the server uses to find the recipient:
Search Common Name
■
(for Mail via First Name
■
SMTP using Last Name
■
LDAP only) User ID
■
The setting defines the information that the user sees on the Send
screen at the device.
Tip: If you are using an Active Directory server and want the list of
recipients to display groups as well as individuals, eCopy recommends
that you retain the default setting, Common Name. If you select any
other search criterion, users who want to send documents to a group
must enter the complete e-mail address of the group at the device.
Search while Enables or disables the Search while typing option at the device (see
typing page 70)
Server The SMTP server name.
Port The SMTP port number.