Configuring The Display Properties; Table 9. Connector Properties: Display Tab - eCopy imageFORMULA ScanFront 220e Installation And Setup Manual

|
64 Reference: Common configuration information for connectors

Configuring the Display properties

The Display tab specifies the image and label that will be used on the connector button, which
appears on the touch screen.
To configure the Display properties:
In the console tree, select <connector_name> > Properties.
1
Select the Display tab and then specify the settings (see Table 9).
2
Click Save, select or specify the profile name, and then click Save.
3
Field Description
Image Used to select a .gif or .jpg file. .gif files have the advantage of transparency.
Maximum dimensions for the image are 64x64 pixels.
Label Used to enter up to three short lines of text. Press E
To make sure the lines of text fit on the button, save the connector profile, activate the connector,
and then view the button on the device's touch screen.

TABLE 9. Connector Properties: Display tab

between each line.
NTER