eCopy imageFORMULA ScanFront 220e Installation And Setup Manual page 142

|
134 Reference: Connector-specific configuration information
Destination settings
Scan to eCopy Desktop enables you to scan to the following destination types:
Windows Folder
■
Novell Folder
■
FTP Folder
■
USB Flash Drive
■
For each type of folder, except for the USB Flash Drive, you must supply the folder location and
authentication settings.
TABLE 43.
Section
If scanned image file already exists
Folder Location
(For an FTP folder
you must enter and
test the
authentication
information before
you select a folder
location.)
Scan to eCopy Desktop: Destination settings
Field Description
Specifies the action for the connector to take if the recipient's scan
inbox already contains a scanned document with the same file
name:
■
■
■
Path to the Destination information for the scanned documents.
folder Click the Browse button and then select a folder.
Enable Enables users to select a subfolder at the device.
subfolder
navigation
Maximum The number of folder levels down that users may navigate.
folder levels
Overwrite always: Replaces an existing scanned document with
the one the connector is currently saving.
Return error: Displays an error message prompting the user at
the device to change the file name.
Create unique file name: Adds a unique number to the file
name, for example filename.1, filename.2. The scanned
document is saved to the location using a unique file name and
the existing document is not overwritten.