Table of Contents
Advertisement
Licensing devices
Every device that you use with eCopy software requires a valid license. To obtain a license, you
add a unique product key, valid for use with a single eCopy-enabled device, to the local license
database (see page 46). Site licenses, valid for activation with a predefined number of devices, are
also available (see page 46). eCopy recommends that you leave the license database on the local
hard drive. You activate the product key by obtaining a license code from the eCopy activation
Web site (see page 49).
To license a device running ShareScan Embedded software, you must add the device to the
Services Manager after entering the product key (see page 48).
A product key must be added to the license database before the Services Manager can assign it to
a device. Once the key is assigned to a device, it is no longer available for use with other devices.
Note:
If you assign a device to another Services Manager, the license moves with the device.
In the Administration console, the License Information tab displays the status of each product
key in the license database (see Table 6).
Status
Activated
Not Activated
Expired
Activation Required
Blank
TABLE 6. Product key status options
Description
The key has been assigned to a device and the license has been activated.
The key has been assigned to a device but the license has not been activated (30
day grace period is in effect).
The key has been assigned to a device but has expired (you must delete the key
and obtain a new key).
The key has been assigned to a device but has not been activated and the 30
day grace period has expired (you must activate the license to use the device).
The key has not been assigned to a device and is available for use.
®
eCopy ShareScan
Installation and Setup Guide
|
45
Advertisement
Table of Contents
