Table of Contents
Advertisement
|
160
Reference: Using eCopy Connectors
Preview
When the connector finishes scanning the document, review the scanned images.
1
The buttons on the Preview screen enable you to view, delete, rotate, and change the
magnification of the images. After pressing either of the Zoom buttons, you can scroll
through an image and move it by dragging your finger along the image, or by using Page
Up, Page Down, Home, or End keys or the arrow keys.
If necessary, scan additional pages or re-scan any of the original pages by placing the pages
2
in the feeder and then pressing the Scan More button. ShareScan uses the current scanner
settings.
When you scan additional pages, the Client inserts them after the page that is currently
displayed on the Preview screen. For example, if the Client is displaying page 5 of an 8-
page document and you scan 2 more pages, the Client inserts the new pages after page 5.
To review and change the scanner settings, press the Scanner Settings button on the
3
Preview screen. The Scanner Settings... screen appears. After changing the scanner
settings, press OK.
To review and change the document settings, press the Document Settings button on the
4
Preview screen. After changing the document settings, press OK.
When you have scanned all the pages in the document and are satisfied with the settings,
5
press Next.
If prompted, enter any additional document information requested by the connector
6
profile. For example, mail connector profiles can be configured to prompt you to specify
an output file name.
Authenticate (by Connector)
If Session Logon was not enabled, and if the connector profile is configured to send
1
scanned documents from a personal e-mail account, the system will prompt you to log on.
Note:
If the profile is configured to send scanned documents from a generic ShareScan User
account; you will not need to log on.
Enter your user name and password and then press Next.
2
Advertisement
Table of Contents
